Wenhao Microfludic Technology Co.，LTD

English
简体中文 English
  1. WAP
  2. |
Home > Devices > Cutting and Punching
Hole Puncher for PDMS Chips
Hole Puncher for PDMS Chips

    Hole Puncher for PDMS Chips

    Hole Puncher for PDMS Chips consists of a hollow needle and a hand grip tube. The hollow needle is chamfered by mechanical chamfering, and the hole diameter obtained by punching is consistent with the

    1. description

    Hole Puncher for PDMS Chips consists of a hollow needle and a hand grip tube. The hollow needle is chamfered by mechanical chamfering, and the hole diameter obtained by punching is consistent with the inner diameter of the needle. Ergonomic design of the product, easy to use, compared to a simple punch, punch deeper, more straight.

    NameModelthe inside diameterthe outside diameterUnit
    Hole Puncher for PDMS ChipsWH-CF-130.5mm
    0.75mm
    1.0mm
    2.0mm
    2.5mm
    3.0mm    		nonetoolset
    Hole Puncher for PDMS Chips | PDMS Microfluidic Chip Biopsy Puncher Kit


    you maybe like