Home > Components

    KW-type spin-coater

    Spin-coater         KW-type spin-coater is used for the surface of plate making such assemiconductor wafer, glass slide, chip, substrate, ITO conductive gl

    1. description

    Spin-coater 

            KW-type spin-coater is used for the surface of plate making such as semiconductor wafer, glass slide, chip, substrate, ITO conductive glass and so on。This product has some advantages as following,stability speed and speedy start。It can ensure semiconductor materials to consistency and uniformity in the coating thickness and uniformity。This product usually used in conjunction with oil-void air compressor. At present, there is the model KW-4A and KW-5 type.

    Product main features: 

    1、High-frequency speed regulation, stability performance better,speed of adjustment displayed by the figures。

     2、It’s very stable when the speed at 500 ~ 8000 r / min range。 

    3、Dual speed。At startup, the first low-speed operation, so that glue spread, and then automatically change to the high-speed operation。Speed and the corresponding two separately adjustable time, the time control at 1 ~ 18 seconds and 3 seconds ~ 1 minute. 4、With timing function; 

    5、use photoelectric to measure the speed 。It generated photoelectric pulse, and the crystal frequency measured the high precision speed。

     6、use solenoid valve to control " attract the sample ",so a oil-void air compressor can take several spin-coaters at the same time , fit assembly line process, improve efficiency

    7、Because of damping on the structure installation,low noise on operation,and uniform coating surface, and adjusting the speed of coating thickness adjustment。

    Performance Indicators: 

    KW-4A type spin-coater (photograph) 

    1、The speed range and glue uniformity time 

    Ⅰgear speed range:500-2000 rotation per minute 

    Ⅰgear glue uniformity time:2-18 second 

    Ⅱgear speed range:1300-8000 rotation per minute 

    Ⅱgear glue uniformity time:3-60 second

    2、application:Φ5-Φ100mm silicon and other materials。 

    3、LED figures show,speed stability:±1%,the uniformity of glue:±3%。 

    4、Motor Power:40W 

    5、Vacuum pump exhaust rate≥60 litre per minute 

    6、Small size, light weight, easy to operate 

    7、Equipment size:210×220×160mm KW-5 type spin-coater (photograph)

     1、The speed range and glue uniformity time

    Ⅰgear Speed range:500-1000 rotation per minute 

    Ⅰgear glue uniformity time:2-18 second

     Ⅱgear Speed range:1000-5000 rotation per minute 

    Ⅱgear glue uniformity time:3-60 second

    2、application:Φ100-Φ200mm(4”~8”) silicon and other materials。

     3、LED figures show,speed stability:±1%,the uniformity of glue:±5%。 

    4、Motor Power:140W 

    5、Vacuum pump exhaust rate:1litre per minute 

    6、Equipment size:500×500×460mm